温度对樟子松和沙地云杉种子萌发特征的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

甘肃省技术研究与开发专项计划项目“干旱沙区沙地云杉引种繁育及造林技术研究与示范”(0709TCYH035);公益性科研院所专项(CAFYBB200700X);甘肃省中青年科技研究基金项目(2008GS01408)


Effects of Temperature on Germination Characteristics of Pinus Sylvesiris var. Mongolica and Picea Mongolica Seed
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对不同温度条件下樟子松和沙地云杉种子的发芽特征研究,分析了温度对发芽率、发芽势、发芽指数、平均发芽天数、胚根长、胚芽长、胚根/胚芽比和活力指数的影响。结果表明,温度对发芽率、发芽势、发芽指数、平均发芽天数、胚根长、胚芽长、胚根/胚芽比和活力指数的影响均达到极显著水平。10~25℃温度范围内樟子松和沙地云杉均有较高的发芽率,20~25℃为樟子松和沙地云杉发芽的最适温度;温度超过30℃时发芽种子有腐烂现象,所以温度高于30℃不适合樟子松和沙地云杉种子发芽。在适宜温度下,沙地云杉发芽率大于樟子松,且发芽整齐,但樟子松生长快于沙地云杉,耐高温也优于沙地云杉。

    Abstract:

    Effects of temperature on the germination of Pinussylvesiris var.mongolica and Picea mongolicawere studied by observing their germination characteristics such as germination rate,energy,index,mean gemination time,length of radicle and hypocotyl,radicle/hypocotyl ratio and vigor index.The results showed that different germination temperatures significantly influenced germination characteristics mentioned above.The germination rate of Pinussylvesiris var.mongolica and Picea mongolica were all fairly high in the temperature range from 10 to 25,temperature range of 20 to 25 was their optimum range.When the temperature is above 30,it was not suitable for seed germination of Pinussylvesiris var.mongolica and Picea mongolica,because some or all of germinating seeds were rotten.At the optimum temperature range,germination rate of Picea mongolica was higher than that of Pinussylvesiris var.mongolica,and germination was more tidy.How ever,Pinussylvesiris var.mongolica grew faster than Picea mongolica,and the former was more resistant to high temperature than the latter.

    参考文献
    相似文献
    引证文献
引用本文

李银科,刘世增,康才周,满多清,李得禄.温度对樟子松和沙地云杉种子萌发特征的影响[J].水土保持通报,2011,(4):73-77

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-11-05
  • 最后修改日期:2010-12-05
  • 录用日期:
  • 在线发布日期: 2014-11-26
  • 出版日期: